Skip to product information
1 of 3

Uniview

AUTO-TRACKING IP PTZ CAMERA (20X OPTICAL, SMART, WDR)

AUTO-TRACKING IP PTZ CAMERA (20X OPTICAL, SMART, WDR)

Low stock: 5 left

Part of the UNV LightHunter range, this vandal resistant dome IP PTZ camera boasting an impressive 2 megapixel HD recording resolution and an auto-focusing 20x optical zoom lens. Supporting Ultra265 compression and up to 150m of IR range.

-Vandal Resistant (IK10 Rating)
- Resolution 2MP (1920 x 1080), POE
- Motorised 5.2-104mm Lens, Angles 55.9° ~ 3.5° (H)
- 20x Optical Zoom, 16x Digital Zoom
- Smart IR, Up To 150m IR Range
- Day/Night, IR Cut Filter, 3D DNR
- WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI, 9:16 Corridor Format Support
- Supports H.264, H.265 or Ultra 265
- Alarm I/O, 1 Input and 1 Output
- ONVIF Compliance (Profile G, S, T)
- Temperature Range -40°C to 65°C
- Wide voltage range of ±25%
- Metal Housing, IP66 Rated
- 6kV surge protection

Special Features

ANR (Automatic Network Replenishment)

ANR is a feature which allows a camera to record to an onboard MicroSD card, if it loses connection with the NVR. Once the connection has been re-established, the footage is transferred to the NVR. This feature requires ANR support from the camera and NVR.

IK10 Rating

An IK rating refers to how much mechanical impact a product can resist and is defined in IEC 62262. An IK10 rating means the product is protected against 20 joules impact; this is equivalent to an impact from a 5 kg mass dropped from 400 mm above the impacted surface.

VCA (Video Content Analysis)

VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:

  • Auto Tracking - Tracking a specific target until it is out of range
  • Intrusion Detection - Entering and loitering in a pre-defined virtual region
  • Line Crossing - Detect when a pre-defined virtual line has been crossed
  • Motion Detection - Movement within a pre-defined virtual region
  • Recognition - Face and audio detection
  • Statistical Analysis - People counting
  • Tamper Identification - Detect when the camera has been physically tampered with

 

Specification

Camera
Image Sensor: LightHunter CMOS (1/2.8")
Resolution: 2MP
Effective Pixels (H x V): 1920 x 1080
TV System: PAL / NTSC
Shutter Speed: Auto/Manual, 1/1~1/100000s
Signal-to-noise Ratio: ≥52dB
Iris: Auto/Manual, F1.5 ~ F3.0
Back Light Compensation: Via OSD Menu
Wide Dynamic Range: 120dB
Digital Noise Reduction: 2D/3D
Gain Control: Auto
Sync Mode: Internal
White Balance: Auto/Manual
Lens: Motorised 5.2-104mm, 20x Optical and 16x Digital
Field of View: 60.2°~ 3°
Scanning: Progressive Scan
Onboard Recording: Yes, to MicroSD card up to 128GB
Pan & Tilt
Pan Range: 360° (endless)
Pan Speed: 0.1°/s ~ 240°/s (Preset speed: 300°/s)
Tilt Range: -15° ~ +90° (auto reverse)
Tilt Speed: 0.1° ~ 160°/s (Preset speed: 240°/s)
Number of Presets: 1024
Patrol: Preset patrol
DORI
Detect: 80.7-1613.8m
Observe: 32.3-645.5m
Recognise: 16.1-322.8m
Identify: 8.1-161.4m
Day/Night
Day & Night: IR Cut Filter (Smart IR)
Minimum Illumination: Colour 0.001Lux, 0Lux with IR on
IR Range: 145-150m
IR Control: CDS Auto
Network
Ethernet: RJ45 10/100
Supported Protocols: IPv4,IGMP,ICMP,ARP,TCP,UDP,DHCP, RTP,RTSP,RTCP,DNS,DDNS,NTP,FTP,UPnP,HTTP,HTTPS,SMTP,SSL
ONVIF: Supports ONVIF (Profile G, Profile S, Profile T)
POE: Yes (60W POE injector required)
Main Stream: 1920x1080@60fps
Sub Stream: 720x576@30fps
General
Power: AC 24V±25% / DC12V(±25%) / PoE+ (IEEE 802.3at)
Housing: Metal
Power Consumption: Max 44W
Operating Temperature: -40°C ~ +65°C
Operating Humidity: 10% - 95% RH
Ingress Protection: IP66
Approvals: CE / FCC
Weight: 5.3kg
Interface
Audio I/O: Microphone in (x1), Audio line out (x1)
Alarm I/O: Alarm input (x1), Alarm output (x1)

Dimensions 

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)